DiamondCore R15 Ribbon Handheld Clay Extruder
R15
The R15 Ribbon Handheld Clay Extruder creates clean and beautiful handles and feet for ceramic pierces. It slices through clay to make a sleek, long ribbon-shaped strip. Try this pottery tool out for yourself!
DESCRIPTION:
Angled, stainless-steel blade leaves clean edges and pulls through clay effortlessly
4 3/8-inch (11 cm)-long hardwood handle
Great for feet, handles, and more
Adjustable-depth ski controls the thickness of the cut
Max approx. blade width 24 mm X height 9 mm
Min approx. blade width 23 mm X height 5 mm
Wood grain may vary
USES/BENEFITS:
Make feet for slab-built pieces
Ideal for hand-builders and useful for throwers
Consistent shape and adjustable thickness
So easy to use; avoid all that pulling
Works on a variety of clay types
Always-sharp stainless-steel blade won’t rust or shatter
A variety of basic and intricate shapes are available
CAUTIONS:
Not designed to be used with extremely wet or sticky clay
Use all safety precautions
Keep out of the reach of children
TIP:
For best results, use these foot and handle-making tools when the clay is not extremely wet or sticky. The clay tool blade should be clean and dry. Ideally, pull the extrusion up and out as it is being formed or fold back the sides of the slab so the extrusion pops up and out.
R15
The R15 Ribbon Handheld Clay Extruder creates clean and beautiful handles and feet for ceramic pierces. It slices through clay to make a sleek, long ribbon-shaped strip. Try this pottery tool out for yourself!
DESCRIPTION:
Angled, stainless-steel blade leaves clean edges and pulls through clay effortlessly
4 3/8-inch (11 cm)-long hardwood handle
Great for feet, handles, and more
Adjustable-depth ski controls the thickness of the cut
Max approx. blade width 24 mm X height 9 mm
Min approx. blade width 23 mm X height 5 mm
Wood grain may vary
USES/BENEFITS:
Make feet for slab-built pieces
Ideal for hand-builders and useful for throwers
Consistent shape and adjustable thickness
So easy to use; avoid all that pulling
Works on a variety of clay types
Always-sharp stainless-steel blade won’t rust or shatter
A variety of basic and intricate shapes are available
CAUTIONS:
Not designed to be used with extremely wet or sticky clay
Use all safety precautions
Keep out of the reach of children
TIP:
For best results, use these foot and handle-making tools when the clay is not extremely wet or sticky. The clay tool blade should be clean and dry. Ideally, pull the extrusion up and out as it is being formed or fold back the sides of the slab so the extrusion pops up and out.
R15
The R15 Ribbon Handheld Clay Extruder creates clean and beautiful handles and feet for ceramic pierces. It slices through clay to make a sleek, long ribbon-shaped strip. Try this pottery tool out for yourself!
DESCRIPTION:
Angled, stainless-steel blade leaves clean edges and pulls through clay effortlessly
4 3/8-inch (11 cm)-long hardwood handle
Great for feet, handles, and more
Adjustable-depth ski controls the thickness of the cut
Max approx. blade width 24 mm X height 9 mm
Min approx. blade width 23 mm X height 5 mm
Wood grain may vary
USES/BENEFITS:
Make feet for slab-built pieces
Ideal for hand-builders and useful for throwers
Consistent shape and adjustable thickness
So easy to use; avoid all that pulling
Works on a variety of clay types
Always-sharp stainless-steel blade won’t rust or shatter
A variety of basic and intricate shapes are available
CAUTIONS:
Not designed to be used with extremely wet or sticky clay
Use all safety precautions
Keep out of the reach of children
TIP:
For best results, use these foot and handle-making tools when the clay is not extremely wet or sticky. The clay tool blade should be clean and dry. Ideally, pull the extrusion up and out as it is being formed or fold back the sides of the slab so the extrusion pops up and out.